Airflow Solutions Customized To Your Needs

Accutrol's innovative airflow solutions are award‐winning, standard‐setting and customizable. With your input, we'll tailor and integrate an airflow solution that will optimize your safety, comfort and energy efficiency.

Critical Environment Airflow Control Products

Airflow Control Valves

The award winning AccuValve is designed for critical environment airflow control in laboratories, life science and healthcare facilities where precise airflow measurement and control is required. The AccuValve meets the high demands of these facilities through two different airflow control valve offerings as listed below. The AccuValve is available in fast speed of response for applications such as laboratories and other critical spaces and standard speed actuation for applications such as healthcare, life science and laboratory support spaces. A simple and intuitive graphical user interface is provided free of charge, which enables the user to configure the valve for their specific requirements.

Learn more »

Product Sheet Downloads

AccuValve Model AVT6000

  • Exceptionally low pressure drop
  • True airflow feedback
  • No straight run requirements
  • Linear control response
  • High accuracy and turndown
  • Can be mounted in any position
  • ASHRAE 90.1 compliant – no additional hardware
  • High-speed and standard speed actuation available
  • Universal I/O (software selectable)
  • Intuitive graphical user interface
  • Optional BACnet® communication
  • Optional remote mount airflow monitor
  • Optional Bluetooth® wireless configuration

AccuValve Model AVC6000

  • Exceptionally low pressure drop
  • True airflow feedback
  • No straight run requirements
  • Linear control response
  • High accuracy and turndown
  • Can be mounted in any position
  • ASHRAE 90.1 compliant – no additional hardware
  • High-speed and standard speed actuation available
  • Stand-alone or setpoint control (software selectable I/O)
  • Integral on-board controller with native BACnet® communication
  • Intuitive Graphical User Interface
  • Optional remote mount airflow monitor
  • Optional Bluetooth® wireless configuration

AVC Fume Hood Control System

The award-winning Accutrol AVC Fume Hood Control System provides an unprecedented evolution in fume hood control technology. The AVC Fume Hood Control System combines the award-winning design of the low pressure drop AccuValve® Airflow Control Valve with a "smart" fume hood display, sash measurement and a powerful and intuitive user interface. This package demystifies fume hood technologies and significantly simplifies the start-up, operation and modification for VAV fume hoods.

Learn more »

Product Sheet Download

Accutrol AVC Fume Hood Control System

  • AVC fume hood control system combines the precise control of the AccuValve AVC with fume hood monitoring and sash positioning technology

Room Airflow and Temperature Controllers

All AccuValve airflow control valves can be universally controlled through the BAS. When there is a desire for individual room control by Accutrol, we offer a full line of individual room controllers. Controller applications are offered for smaller healthcare and life science support spaces through large laboratory spaces that require fast speed of response for precise room airflow balancing and temperature control.

Learn more »

Product Sheet Downloads

Accutrol HTC100 – HealthTrack™ Room Temperature Controller (BACnet® MS/TP)

  • For seamless control of healthcare spaces with AccuValve AVC6000 (standard actuation)

Accutrol RTC100 – RoomTrack™ Room Temperature Controller (BACnet® MS/TP)

  • For seamless control of life science and lab support spaces with AccuValve AVC6000 (standard actuation)

Accutrol AC7100 – Critical environment room controller (30 point)

  • High speed, versatile, native BACnet (8-DO, 8-UI, 8-DI, 4-AO, 2 Pulse)

Accutrol AC7200 – Critical environment room controller (20 point)

  • High speed, versatile, native BACnet (6-UO, 12-UI, 2-DO)

Accutrol AC7300 – Critical environment room controller (32 point)

  • High speed, versatile, native BACnet (8-UO, 16-UI, 8-DO)

Room and Duct Temperature Sensors

The Accutrol Room Temperature Sensor and Duct Temperature Sensor are designed for use with the Accutrol AC7000 series controllers, HealthTrack Room Controller (HTC100) and RoomTrack (RTC100) Room Controller and BAS controllers.

Learn more »

Product Sheet Downloads

Accutrol RTS100 – A wall mounted Type II, 10K ohm thermistor Room Temperature Sensor that is available with options such as display, setpoint adjustment slider and momentary override switch. It is also available as a combination temperature/humidity sensor. It is used with the HTC100/RTC100 series controller when the controller is mounted outside of the controlled space.

Accutrol DTS100 – A duct mounted Type III, 10K ohm thermistor Duct Temperature Sensor designed for measurement of duct temperature after the discharge of a reheat coil.

Room Pressure Monitors

The Accutrol Room Pressure Monitor line is designed for critical low differential pressure applications in hospitals, cleanrooms, pharmaceutical manufacturing and research labs.

Learn more »

Product Sheet Downloads

Accutrol SRPM – Room Pressure Monitor designed for critical low differential pressure applications that require stringent pressure monitoring and alarming.

Accutrol SRCM – Room Pressure and Condition Monitor designed to measure and display true low pressure differential in pharmaceutical, hospital, laboratory and research facilities. This monitor provides display for up to 4 ambient parameters and has BACnet MSTP communications.

Accutrol SRIM – Room Isolation Monitor designed to measure and display true low pressure differential in pharmaceutical, hospital, laboratory and research facilities.

Accutrol MRMS – Multi‐Room Monitoring Station designed for installation in a central location such as a nurses station or main control room. It connects to other SRPM and SRCM units through BACnet MSTP.

Airflow Measurement Products

Accutrol Airflow Measurement Products are designed for precise airflow measurement, monitoring and control. Our innovative products are designed for direct input to the building automation system to provide accurate airflow measurement for many types of applications including Outside Air, Duct and Fan Inlet airflow measurement. The VorTekG3 is designed for ease of application, installation and use.

Learn more »

Product Sheet Downloads

Accutrol VorTekG3 VTD The VorTekG3 model VTD is designed for duct airflow measurement applications, incorporating a modular design concept, BACnet option and the free award winning Accutrol Insight graphical software.

Accutrol VorTekG3 VTF The VorTekG3 model VTF is designed for fan inlet applications and offers the free award winning Accutrol Insight graphical software with BACnet communications availability.

Accutrol VorTekG3 VTFA The VorTekG3 model VTFA is designed for fan array applications and offers the free award winning Accutrol Insight graphical software with BACnet communications availability.

Accutrol IAQ-Tek The IAQ‐Tek Outdoor Air Volume Measuring System simplifies outdoor air measurement at the entrance to fan systems by incorporating a measurement probe designed specifically for the low velocities and high turbulence associated with outdoor air intakes.

Pneumatic Airflow Control Valves

Please contact us or your local representative if you are in need of any information regarding Pneumatic Airflow Control Valves.